HOME
PRODUCTS
VERSION 2.2
GALLERY
FORUM
SUPPORT
ABOUT
USER GUIDE

Racepak DatalinkII Integration
MoTeC i2 Integration

Contact



These leading logger vendors have added TrackVision integration to their flagship data analysis applications. TrackVision is seamlessly integrated with Racepak’s IQ3 & G2X and Datalink II, and with MoTeC’s ADL2 and i2Pro.

With your data and video opened in i2Pro or DatalinkII, a single click launches TrackVision with your video and data loaded, synchronized, and ready to save. What could be easier than that?
Click the appropriate logo to see just how easy it is!


Axis is the place for F1 & other
road racing news, and the best
selection of video from world
sources. The site also features
track video from the Axis team
and others, including some
TrackVision video. The guys at
Axis like TrackVision. Read
their insightful review & check
out the site. It's a favorite of ours.

 
MotorTrend's Technical Editor,
Kim Reynolds, is a pioneer. Kim
is using TrackVision to enrich
the production of MotorTrend's
road test videos with data.
Read Kim's comments on this experiment, and take a look at
the videos linked in his article.

 

Welcome to MoTeC i2Pro integration with TrackVision™

MoTeC i2 Pro now includes automated synchronization of video with the logged data. The combination of ADL2 Dash Manager 4.5 or higher plus the new Video Sync Module [VSM] and i2 Pro V1.03.0020 will automatically synchronize the video with the data within i2 Pro. i2 Pro's new VideoGen feature seamlessly integrates with TrackVision to combine the video and data into high quality video like this:

Download and Install TrackVision to use with i2Pro

Our free demonstration version of TrackVision works perfectly with i2 Pro and has all the features of the licensed TrackVision product, with two exceptions:

  • Finished video can be Shown but not Saved.
  • A Main Concept logo is displayed if your input video is in MPEG and H.264 format.

    • Click HERE to download and install the free TrackVision demo version

    Click HERE to purchase a fully licensed TrackVision installation


    Preparing TrackVision for i2 Pro VideoGen

  • Start TrackVision, and click Edit/Preferences.




  • Change the Video Output folder to \MoTeC\Projects to keep all your i2 files in the same place.

  • Select MoTeC i2 Pro 1.0.3 VideoGen from the Logger Models list

  • If you use KPH units for speed, check the 'Use KPH...' box

  • Select MoTeC_VideoGen from the Dashboard list, or MoTeC_VideoGen GPS if you have the GPS option.

  • Uncheck the 'Warn on Save Movie...' and 'Show/Save Movie...' boxes.

  • Check 'Use PAL frame sizes...' if you do not want NTSC [US and Japan] frame sizes.

  • Click OK, then exit TrackVision.

    • TrackVision is now ready for i2 Pro VideoGen operation.


    Using i2 Pro VideoGen

  • Open your log file and your video in i2 Pro. The video will be automatically synced with the data, and you are ready to create a TrackVision video.
  • Click File/Generate Video, and you will see the following dialog:




  • Select the channel in your log file that contains RPM and Speed, and the correct speed units.
  • On the right, select the matching channel for each.
  • i2 Pro will store these settings, so you will only need to do this once.
  • When you are ready, click Run TrackVision.

    • i2 Pro will start TrackVision with the data and the video loaded, synchronized, and ready to Show your video.




  • Click Show Movie, and you will see the Movie Options dialog




    • OK to show your first TrackVision video.

    What's Next?

    When your video finishes, you will be returned to the TrackVision project screen. You can drag the red and green editing arrows to set new start and end points for the video. This is an easy way to isolate a single lap or an incident within the video. Now, when you click Show Movie, TrackVision will use your new Start and End times.

    You can experiment with Movie Options settings including:

  • Transparency, which controls the transparency of the data dashboard
  • Frame Margin, which moves the data dashboard away from the frame border for DVD creation
  • Event Title, where you can add title information that will appear on your video
  • You can select a different dashboard. Dashboards are easy to modify, and many of our users create their own

    • You will see your changes in the preview window as you make them.


  • If you have licensed TrackVision, you can save your movies in DV, MPEG2, MPEG4, H.264, or Windows Media Video format
  • You can select from a large range of frame sizes, including wide screen 16:9 formats

    • There's much more, of course.


    TrackVision Resources

    Much more information and help is available here:

  • On the TrackVision main menu bar, click Help/Help Topics to open the User Guide.
  • Visit The TrackVision Forums to ask questions and see the user community in action.
  • If you have questions about using i2Pro with TrackVision, click The i2 VideoGen Forum or email TrackVision Support directly

    • We are ready to help you get the most from this new MoTeC i2 Pro capability.

    VIDEO + DATA = TrackVision


    © Copyright 2004-2012 Apex Visualizations LLC. All rights reserved
    TrackVision is a trade mark of Apex Visualizations, LLC